Fabrication of poly (styrene-acrylate)/silver nanoparticle-graphene oxide composite antibacterial by in situ Pickering emulsion polymerization

Graphene oxide (GO) nanosheets decorated with silver nanoparticles (AgNPs) were easily synthesized by chemical reduction, and the prepared nanocomposite was then used as a stabilizer in the Pickering emulsion polymerization of poly (styrene-acrylate) to prepare PSA/AgNPs-GO composites. The AgNPs-GO nanocomposites were fully characterized by TEM, FTIR, Raman, SEM and XPS, which demonstrated that about 5–30 nm AgNPs with spherical, octahedral and cubic structures were decorated on the surface of wrinkled GO nanosheets. TEM photos and EDS spectrum of composites showed that the transparent GO nanosheets decorated with AgNPs were covered on the surface of PSA latexes and the AgNPs were uniformly dispersed on the surface of the PSA latexes without aggregation. The average diameter of composite latexes was obviously bigger than that of PSA latexes. However, the role of surfactant and the properties of hydrophilicity decreased the average diameter and WCA of composites while increasing the additions of AgNPs-GO nanocomposites. AFM images disclosed that wrinkled GO nanosheets decorated with AgNPs dispersed on the surface of composite films. XPS data proved clearly that silver was present only in metallic form and migration occurred during film-formation. TGA curves confirmed the composite film displayed better thermal stability than that of PSA. The results of antibacterial activity revealed that composite films had exhibited antibacterial properties against both E. coli and S. aureus, and the latter showed better antibacterial efficacy than the former. The nano-silver polyacrylate coatings with antibacterial activity explored in current work have wide application in the fields of wood coatings, leather finishing, and so on.