Evaluation of foaming agents for high‐temperature, high‐pressure, and high‐salinity reservoirs based on a new foam evaluator

Abstract In this study, a novel high‐temperature and high‐pressure foam evaluator with variable diameters inner cell and cylinder flip function was designed on our own, which can solve the problems such as difficulties in foam generation and inaccurate determination of various foam parameters by the same type of instruments, through which the foaming performance of more than 10 betaine surfactants was evaluated. The results show that: (1) the higher the pressure, the higher the foaming rate of the foaming agent and the more stable the foam, but the foam stability of the foamers at low and high pressures, and low and high temperatures do not correspond exactly, and the foaming agent used needs to be screened under simulated reservoir conditions. (2) The comprehensive foaming performance of different types of foamers with different molecular structures found that hydroxy sulfobetaine with longer carbon chains has a relatively better foaming performance. Therefore, for the reservoir conditions of temperature 130°C, pressure 30 MPa, and salinity 22 × 10 4 mg/L, hydroxy sulfobetaine, which does not contain an amide group in the molecule, can be considered preferentially as a foaming agent. The results can guide the selection of foaming agents for high‐temperature and high‐salinity reservoirs.