Production of C2−C4 Olefins with Fischer‐Tropsch‐Synthesis: The Effect of Cu Promoter Loading on an Fe−Cu−K/SiO2 Catalyst

Abstract In this study we focus on the iron‐based catalyst to produce C 2 −C 4 olefin hydrocarbons via the high‐temperature Fischer‐Tropsch synthesis. Promoters have a significant impact on catalyst stability, activity, and product selectivity. Therefore, we investigated the effect of the Cu promoter in an Fe−Cu−K/SiO 2 catalyst. We compared the catalyst without Cu and 1, 2, 3, 4, and 5 wt % Cu loadings. The overall catalyst activity increased from 0 to 3 wt % Cu loading and started to decrease at 4 and 5 wt % Cu loadings. Although overall catalyst activity had an optimum with 3 and 4 wt % Cu loading, the Cu loading had a negligible effect on product selectivity. However, when compared to a non‐Cu promoted catalyst, the Cu addition increased the selectivity towards olefinic C 2 −C 4 hydrocarbons. The Fischer‐Tropsch experiments were performed in a tubular reactor system at 300 °C, 21 bar and H 2 : CO=2 at different feed volume flows, with hydrogen activation. According to the performed temperature‐programmed dynamic chemisorption analysis, the Cu promoter assisted the iron reduction, and the lower overall activity to 0–2 wt % Cu loading might relate to insufficient dissociated H surface species, rather than the availability of C from dissociated CO.