Soft pneumatic actuator-driven origami-inspired modular robotic “pneumagami”

This article presents a new modular robotic platform for enabling reconfigurable, actively controlled, high-degree-of-freedom (high-DoF) systems with compact form factor. The robotic modules exploit the advantages of origami-inspired construction methods and materials, and soft pneumatic actuators (SPAs) to achieve an actuator embedded, parallel kinematic mechanism with three independently controlled “waterbomb” base legs. The multi-material, layer-fabricated body of the modules features selectively compliant flexure hinge elements between rigid panels that define the module as a kinematic 6R spherical joint. The precision layer-fabrication technique is also used to form embedded distribution channels within the module base to connect actuators to onboard control hardware. A decentralized control architecture is applied by integrating each module with small-scale solenoid valves, communication electronics, and sensors. This design approach enables a single pneumatic supply line to be shared between modules, while still allowing independent control of each leg joint, driven by soft, inflatable pouch actuators. A passive pneumatic relay is also designed and incorporated in each module to leverage the coupled, inverted inflation, and exhaust states between antagonistic actuator pairs allowing both to be controlled by a single solenoid valve. A prototype module is presented as the first demonstration of integrated modular origami and SPA design, or pneumagami, which allows predefined kinematic structural mechanisms to locally prescribe specific motions by active effect, not just through passive compliance, to dictate task space and motion. The design strategy facilitates the composition of lightweight, high-strength robotic structures with many DoFs that will benefit various fields such as wearable robotics.