Efficacy and safety of a 3D-printed applicator for vaginal brachytherapy in patients with central pelvic-recurrent cervical cancer after primary hysterectomy

Intracavitary and/or interstitial brachytherapy is an integral component of the management of patients with central pelvic-recurrent cervical cancer after primary hysterectomy, and is typically delivered using conventional applicators. We investigated the efficacy and safety of three-dimensional (3D)-printed, customizable applicators for those patients.Twenty-six patients were treated with combination external beam radiotherapy and brachytherapy. Patients with lesions ≤1 and >1 cm before brachytherapy were treated with intracavitary and interstitial brachytherapy, respectively. Dosimetric plans were compared between the vaginal cylinder and 3D-printed applicator for the first 9 patients. Outcomes and treatment-related complications were also investigated.The median tumor size before brachytherapy was 0.81 cm. Intracavitary, interstitial, and combined interstitial-intracavitary brachytherapy were performed in 22 (85%), 3 (11%), and 1 (4%) of the patients, respectively. The clinical target volume (CTV) coverage goal was achieved with all 3D-printed plans but failed with three single-channel cylinder plans (33.3%). Owing to 3D-printed transvaginal applicator guidance, there was no need to adjust the needle position after implantation. The mean CTV dose for all patients was 71 ± 8.2 Gy; all met the dose constraints to the organs at risk, but 1 (4%) had a rectal D2cc overdose. The 2-year local control, progression-free survival, and overall survival rates were 87.8%, 71.0%, and 91.6%, respectively. Four patients (21%) developed early grade 3-4 hematological toxicities and 1 (4%) developed a late grade 3 adverse event.High-quality intracavitary and/or interstitial brachytherapy can be achieved using a 3D-printed applicator and yields favorable outcomes with acceptable toxicity.