Effect of the Additive Fire Retardants on the Properties of Rigid Polyurethane Foams, Obtained Using Hydroxyethyl Derivatives of Oxamide and Polymeric 4,4′-diphenylmethane Diisocyanate

The present work investigates the effect of polyol structure and physical addition of boric acid and N,N′-bis(2-hydroxyethyl)oxamide on the properties of rigid polyurethane foams. The product of hydroxyalkylation of oxamide by ethylene carbonate has been used as a polyol component. The new polyol has been foamed using polymeric 4,4′-diphenylmethane diisocyanate, water, and triethylamine. To decrease the flammability of the foams, boric acid, and N,N′-bis(2-hydroxyethyl)oxamide were used as the additive flame retardants. It has been found, that chemical modification of the foam structure by means of oxamide groups decreases their flammability only to a small extent, whereas physical addition of N,N′-bis(2-hydroxyethyl)oxamide does not influence the flammability. However, the addition of boric acid to the foam composition resulted in a distinct decrease of foam flammability, according to the amount of boric acid added. All the foams, modified and nonmodified by boron, have been categorized into flammability class HF-1, according to the applicable standard. The introduction of flame retardants had its impact on the properties of polyurethane foams obtained, as described in this work.