The impact of liquid drops on powder bed surfaces

下降(电信) 跌落冲击 分手 表面张力 材料科学 粒径 韦伯数 颗粒(地质) 复合材料 化学 机械 润湿 热力学 雷诺数 物理化学 物理 电信 湍流 计算机科学
作者
Shane Agland,S.M. Iveson
出处
期刊:Chemeca 99: Chemical Engineering: Solutions in a Changing Environment 卷期号:: 218- 被引量:12
摘要

The phenomena of liquid drop impacts on powder bed surfaces plays an important role in wet granulation processes. The liquid binder is sprayed onto the tumbling powder mass where it forms nuclei by binding particles together by a combination of viscous and capillary forces. In many processes, there is a strong correlation between droplet size and granule nuclei size. If the liquid droplets break-up during impact, then this will increase the number and decrease the size of granule nuclei produced. If drops spread across the surface before sinking in, then this will increase the surface coverage and incidence of caking and nuclei coalescence. Although liquid drop impacts on solid and liquid surfaces have been studied extensively, there is little work concerning drop impacts on powder surfaces. This paper reports the results of preliminary experiments studying the behaviour of liquid drops impacting a static powder bed. Water, methanol and silicone oil were used in order to vary liquid viscosity and surface tension. The powder studied was glass ballotini with sizes ranging from 60 to 850 mum. The amount of drop surface spreading increased with impact velocity, and there was a critical drop impact Webber number (Wecrit) required for drop breakup in the order of 1000. This critical Webber number appeared to increase with increasing particle size. Drop impact behaviour displayed behaviour with analogies to impacts with both solid and liquid surfaces, depending on whether or not the liquid spread across the surface before a significant amount had soaked in. It was concluded that drop break-up was unlikely to occur under most practical granulation conditions.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
晚睡是小狗完成签到,获得积分10
1秒前
宁羽发布了新的文献求助10
2秒前
void科学家完成签到,获得积分10
3秒前
CipherSage应助Monster采纳,获得30
3秒前
wuzhizhongbin完成签到,获得积分10
3秒前
拾春完成签到,获得积分10
3秒前
4秒前
Wang_miao完成签到 ,获得积分10
4秒前
4秒前
why完成签到,获得积分10
5秒前
DMD应助幽魂采纳,获得10
5秒前
Owen应助chunying采纳,获得30
5秒前
bie123应助白华苍松采纳,获得20
6秒前
7秒前
彪壮的绮梅应助微笑襄采纳,获得10
7秒前
7秒前
7秒前
7秒前
花傲天应助微笑襄采纳,获得10
7秒前
dyk完成签到,获得积分10
7秒前
科yt完成签到,获得积分10
8秒前
123发布了新的文献求助10
9秒前
slin_sjtu发布了新的文献求助10
9秒前
张迪完成签到 ,获得积分10
10秒前
QWE完成签到,获得积分10
11秒前
二二完成签到 ,获得积分10
12秒前
研友_ngqjz8发布了新的文献求助30
13秒前
qqaeao完成签到,获得积分10
13秒前
泡泡完成签到 ,获得积分10
13秒前
小小月完成签到 ,获得积分10
14秒前
Ningxin完成签到,获得积分10
15秒前
15秒前
喜悦的板凳完成签到 ,获得积分10
15秒前
科研通AI5应助宁羽采纳,获得10
16秒前
孙小雨完成签到,获得积分10
16秒前
科研通AI5应助管理想采纳,获得10
19秒前
两院候选人应助accept采纳,获得10
21秒前
Ra1n完成签到,获得积分20
23秒前
butter0903完成签到,获得积分10
23秒前
宁羽完成签到,获得积分10
23秒前
高分求助中
Continuum Thermodynamics and Material Modelling 3000
Production Logging: Theoretical and Interpretive Elements 2700
Mechanistic Modeling of Gas-Liquid Two-Phase Flow in Pipes 2500
Structural Load Modelling and Combination for Performance and Safety Evaluation 1000
Conference Record, IAS Annual Meeting 1977 720
電気学会論文誌D(産業応用部門誌), 141 巻, 11 号 510
Typology of Conditional Constructions 500
热门求助领域 (近24小时)
化学 材料科学 生物 医学 工程类 有机化学 生物化学 物理 纳米技术 计算机科学 内科学 化学工程 复合材料 基因 遗传学 物理化学 催化作用 量子力学 光电子学 冶金
热门帖子
关注 科研通微信公众号,转发送积分 3566813
求助须知:如何正确求助?哪些是违规求助? 3139569
关于积分的说明 9432078
捐赠科研通 2840387
什么是DOI,文献DOI怎么找? 1560995
邀请新用户注册赠送积分活动 730141
科研通“疑难数据库(出版商)”最低求助积分说明 717855