化学
重复性
色谱法
高效液相色谱法
同位素稀释
分析物
分析化学(期刊)
电感耦合等离子体质谱法
检出限
质谱法
变异系数
萃取(化学)
同位素
乙二胺四乙酸
洗脱
遗传算法
螯合作用
无机化学
生物
物理
进化生物学
量子力学
作者
Marina Amaral Saraiva,Rachida Chekri,Axelle Leufroy,Thierry Guérin,Jens Jørgen Sloth,Petru Jitaru
出处
期刊:Talanta
[Elsevier]
日期:2021-01-01
卷期号:222: 121538-121538
被引量:22
标识
DOI:10.1016/j.talanta.2020.121538
摘要
This study presents the development, validation and application of a new analytical approach for the simultaneous speciation analysis of Cr(III) and Cr(VI) in meat and dairy products by high-performance liquid chromatography (HPLC) coupled to inductively coupled plasma mass spectrometry (ICP-MS) and double spike species specific-isotope dilution (SS-ID). The species extraction was achieved by sequential complexation of Cr(III) with ethylenediaminetetraacetic acid (EDTA) and of Cr(VI) with 1,5-diphenylcarbazide (DPC) in the same analytical run. The HPLC separation of complexed species was carried out using a short (5 cm) microbore anion-exchange HPLC column and a mobile phase consisting of 0.01 mol L−1 HNO3 + 2.5% (v/v) MeOH + 0.30 mol L−1 EDTA (pH = 2) in isocratic elution mode with excellent baseline separation achieved in less than 3 min. The method was validated by means of the accuracy profile approach by carrying out 6 measurement series in duplicate on (six) different days over a timespan of two months. The quantification limit was 0.013 μg kg−1 for Cr(III) and 0.049 μg kg−1 for Cr(VI), respectively. The measurement bias corresponding to the validity domain ranged from 0.01 to 0.11%, whereas the coefficient of variation in terms of repeatability (CVr) varied from 2.9 to 11.6% (depending on the analyte level) for Cr(III) and from 6.7 to 11.8% for Cr(VI). Similarly, the coefficient of variation in terms of intermediate reproducibility (CVR) ranged from 6.8 to 13% for Cr(III) and from 6.8 to 25.9% for Cr(VI), respectively. The method was successfully applied to the analysis of a selection of food samples such as baby and semi-skimmed milk and steak beef samples. Cr(VI) was not quantified in any of these samples while Cr(III) levels ranged between 2.7 and 4.7 μg kg−1, which were comparable with the levels of total chromium analysed in the same samples by ICP-MS (accredited method). The method presented here with combined use of species specific isotope dilution and sequential species complexation is a powerful analytical tool for accurate and precise quantification of Cr(III) and Cr(VI) at trace levels and allows for correction of any species interconversion during sample preparation.
科研通智能强力驱动
Strongly Powered by AbleSci AI