Optimization of Heterojunction Back-Contact (Hbc) Crystalline Silicon Solar Cell Based on Quokka Simulation

For heterojunction back-contact (HBC) crystalline silicon (c-Si) solar cell based on n-type c-Si wafer, the effects of various wafer properties and geometric features of the solar cell back side on the solar cell current-voltage (I-V) performance were systematically studied by Quokka simulation, including the wafer thickness, resistivity and bulk lifetime, the emitter (P region) percentage on the surface, the total pitch of P and N regions, and the contact ratio of the transparent conductive oxide (TCO) film on the P or N region. The preferred values of such parameters for the HBC solar cell to get high efficiency were proposed. The emitter percentage is 80%, the total pitch of P and N is 1.6 mm, the wafer thickness is in the range of 90 μm-120 μm, the wafer resistivity is 0.5 Ω·cm-0.9 Ω·cm, the wafer bulk lifetime is not less than 4 ms, and as long as the cell is not short-circuited, the larger the contact ratio of the TCO, the higher the cell efficiency.