Determination and risk assessment of by-products resulting from photocatalytic oxidation of toluene

Abstract The generation of harmful by-products during photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a bottleneck problem for the application of PCO technology in indoor environment. Toluene is a typical VOC found in indoor air. In this work, the by-products at ppb level were studied during PCO decomposition of toluene in a plate-type reactor and identified using PTR-MS (proton transfer reaction-mass spectrometry) and GC–MS (gas chromatography–mass spectroscopy). The results indicated that benzaldehyde, methanol, acetaldehyde, acetone/propionaldehyde, formic acid/ethanol and acetic acid were the main by-products in the gas phase. By adjusting the concentration of water vapor, some compounds adsorbed on the TiO 2 surface were ascertained, which resulted in the deactivation of TiO 2 . They were benzoic acid, benzene, acrylaldehyde, butyraldehyde and pentanal. Some of these by-products have not been reported in the literature. Possible photocatalytic oxidation pathways of toluene were proposed. A health-related index (HRI) was introduced to assess the risk level to human health of these ppb-level by-products. It concludes that although some undesired by-products (even carcinogenic) are generated during PCO decomposition of toluene, it seems that these by-products do not have negative effects to human health because of their low concentrations.