Investigating extrusion impact on functional, textural properties, morphological structure, and molecular interactions in hulless barley‐based extruded snacks supplemented with mung bean

Abstract The effect of varying extrusion conditions on the functional properties of hulless barley–mung bean (70:30) extruded snacks was investigated using response surface methodology with feed moisture (FM), barrel temperature (BT), and screw speed (SS) as process variables. Results revealed significant impacts on functional characteristics with varying extrusion conditions. Bulk density (BD) of extruded snacks ranged from 0.24 to 0.42 g/cm 3 , showing that lower FM and higher BT results in lower BD while it increased with increasing FM, SS, and BT. The expansion ratio (ER) of extruded snacks ranged between 2.03 and 2.33, showing BT and SS had a desirable positive effect, whereas increasing FM led to decreased ER. Increasing BT and SS depicted a negative effect on water absorption index, whereas FM showed positive effect, which ranged between 4.21 and 4.82 g/g. A positive effect on water solubility index was depicted by BT and SS, which ranges between 9.01% and 13.45%, as higher SS and BT led to starch degradation and increased solubility suggesting better digestibility. The hardness of extruded snacks ranged from 32.56 to 66.88 Newton (N), showing increasing FM increased hardness, whereas higher SS and BT resulted in lowering the hardness. Scanning electronic microscope (SEM) analysis revealed structural changes in extrudates in comparison with nonextruded flour, indicating starch gelatinization and pore formation affected by varying processing parameters. Shifts in absorption bands were observed in Fourier transform infrared spectroscopy (FT‐IR), suggesting structural changes in starch and protein. Understanding the effects of extrusion parameters on product properties can help tailored production to meet consumers' preferences and the development of functional snacks with improved nutritional quality.