Pinewood outperformed bamboo as feedstock to prepare biochar-supported zero-valent iron for Cr6+ reduction

In this work, pinewood and bamboo were pyrolyzed at 600 °C to prepare PBC and BBC-supported zerovalent iron (ZVI), respectively. Raman spectra suggested PBC was more intensively carbonized than BBC as indicated by higher ID/IG ratio. XRD and TEM confirmed nanoscaled ZVI was well dispersed in PBC but soldered in chain-structure in BBC. Maximal chromate (Cr(VI)) sorption capacity followed the order of PBC/ZVI (5.93 g kg−1)>BBC/ZVI (3.61 g kg−1)>BBC (3.55 g kg−1)>PBC (2.59 g kg−1). Desorption and XPS of four Cr-spent sorbents suggested reduction accounted for 79–88% of overall Cr(VI) detoxification. Greater Cr(VI) reduction of BBC than PBC indicated greater tendency of BBC to donate electrons. However, Cr(VI) reduction by PBC/ZVI was 1.7 times greater than BBC/ZVI, corresponding to greater electron transfer of PBC/ZVI (2.5 μA e−) than BBC/ZVI (0.5 μA e−). Thus, PBC is more conducible to transfer electrons as evidenced by Tafel and Amperometric analyses. Demineralization of pristine BC enhanced the difference between PBC/ZVI and BBC/ZVI regarding Cr(VI) reduction, suggesting the dominant role of biopolymers in biomass in terms of electron transfer capacity. Three model biopolymers were compared which indicated lignin-BC had lower electron transfer rates than cellulose-BC and hemicellulose-BC. BC prepared by lignin extracted from pinewood exhibited higher corrosion rate and lower electrical resistance than that from bamboo. Thus, unfavorable lignin in bamboo compromised electron transfer of BBC and Cr(VI) reduction by BBC/ZVI.