Pseudocapacitive deionization with polypyrrole grafted CMC carbon aerogel electrodes

Capacitive deionization (CDI) has been identified as a prospective desalination technology. There has been increasing interest in the exploration of electrodes with high electrochemical properties and salt adsorption capacity. Here, polypyrrole (Ppy)/CA electrodes were prepared by grafting Ppy on carbon aerogel (CA) via in-situ polymerization and applied in CDI desalination. Compared with CA, the Ppy/CA samples display higher specific capacitance, lower charge transfer resistance as well as enhanced ion diffusion rate. Particularly, Ppy/CA shows enhanced pseudocapacitance generation and the synergistic effect of the diffusion-controlled dominating process and capacitive process by Ppy introduction, conducive to the desalination performance. The optimal Ppy/CA-2 CDI system exhibits high adsorption capacity (34.03 mg g−1 with 500 mg L−1 solution), fast salt adsorption rate (0.053 mg g−1 s−1 with 500 mg L−1 solution) together with reasonable long-term stability. The outstanding desalination performance is principally on account of the positively charged nitrogen atoms of Ppy could capture Cl− well through the surface redox reaction in CDI and the most positively charged nitrogen in Ppy/CA-2 contribute its best adsorption capacity. The simple preparation method, excellent electrochemical properties, outstanding adsorption performance, and good cycling stability render Ppy/CA-2 a potential CDI electrode material.