Interfacial IMC growth behavior of Sn-3Ag-3Sb-xIn solder on Cu substrate

Purpose The reliability of solder joints is closely related to the growth of an intermetallic compound (IMC) layer between the lead-free solder and substrate interface. This paper aims to investigate the growth behavior of the interfacial IMC layer during isothermal aging at 125°C for Sn-3Ag-3Sb-xIn/Cu ( x = 0, 1, 2, 3, 4, 5 Wt.%) solder joints with different In contents and commercial Sn-3Ag-0.5Cu/Cu solder joints. Design/methodology/approach In this paper, Sn-3Ag-3Sb-xIn/Cu ( x = 0, 1, 2, 3, 4, 5 Wt.%) and commercial Sn-3Ag-0.5Cu/Cu solder were prepared for bonding Cu substrate. Then these samples were subjected to isothermal aging for 0, 2, 8, 14, 25 and 45 days. Scanning electron microscopy and transmission electron microscopy were used to analyze the soldering interface reaction and the difference in IMC growth behavior during the isothermal aging process. Findings When the concentration of In in the Sn-3Ag-3Sb-xIn/Cu solder joints exceeded 2 Wt.%, a substantial amount of InSb particles were produced. These particles acted as a diffusion barrier, impeding the growth of the IMC layer at the interface. The growth of the Cu 3 Sn layer during the aging process was strongly correlated with the presence of In. The growth rate of the Cu 3 Sn layer was significantly reduced when the In concentration exceeded 3 Wt.%. Originality/value The addition of In promotes the formation of InSb particles in Sn-3Ag-3Sb-xIn/Cu solder joints. These particles limit the growth of the total IMC layer, while a higher In content also slows the growth of the Cu 3 Sn layer. This study is significant for designing alloy compositions for new high-reliability solders.