Effect of Cu addition on the precipitation behavior of M2C carbides in maraging steel

In this study, two Ferrium S53 steels with and without 1.5% Cu were prepared. The microscopic morphology and structure of these steels during aging treatment were analyzed by transmission electron microscopy (TEM). The average equivalent spherical radius (Rv), volume fraction (ϕv), and number density (Nv) of Cu-rich precipitates and M2C carbides during aging treatment were analyzed by atom probe tomography (APT), and the spatial distribution, interfacial elemental segregation, and one-dimensional concentration profiles of the two types precipitates were also characterized. Based on the distribution of elements, 5%Cu and 9% (C + Mo) isoconcentration surfaces were selected to obtain Cu-rich precipitates and M2C carbides, respectively. The results demonstrate that the Cu-rich precipitates formed before the M2C carbides. The segregation of Cr and Mo elements at the phase interface due to the nucleation and growth of Cu-rich precipitates can promote the formation of the M2C carbides. The two types of precipitates display adjacent distribution relationship in steel. The number density of M2C carbides in steel contain 1.5%Cu can be greatly increased when the Cu-rich precipitates serving as nucleation particles. The formation of needle-like M2C carbides inhibited the coarsening of Cu-rich precipitates. More dispersive and fine M2C carbides were obtained in the steel.