激光器
梁(结构)
光学
声学
过程(计算)
Kapton
探测器
声发射
跟踪(教育)
不连续性分类
材料科学
持续监测
焊接
计算机科学
机械工程
工程类
物理
图层(电子)
聚酰亚胺
复合材料
数学分析
操作系统
数学
运营管理
教育学
心理学
标识
DOI:10.1002/9781119881636.ch15
摘要
This chapter discusses some of the sensors and sensing techniques that are commonly used or are under development for monitoring and diagnostics during laser processing. It starts with monitoring of the laser beam itself. This is followed by monitoring of the process, with some of the systems that are discussed also being applicable to seam tracking. The profile or mode of a laser beam can be measured using several techniques: mechanical methods, camera-based methods, and approximate methods. The beam size can be measured in a number of ways, but the easiest approach uses a Kapton film. The principal parameters that need to be monitored during laser welding, for example, include the weld pool geometry, defects or discontinuities, microstructure, residual stresses, and temperatures. Among the most commonly used sensors for real-time monitoring are acoustic emission, audible sound, and infrared/ultraviolet detectors, all of which are secondary outputs.
科研通智能强力驱动
Strongly Powered by AbleSci AI