The Pressure Dependence of the Archie Cementation Exponent for Samples from the Ordovician Goldwyer Shale Formation in Australia

Summary Applying the realistic cementation exponent (m) in Archie’s equation is critical for reliable fluid-saturation calculation from well logs in shale formations. In this study, the cementation exponent was determined under different confining pressures using a high-salinity brine to suppress the surface conductivity related to the cation-exchange capacity of clay particles. A total of five Ordovician shale samples from the Canning Basin, Australia, were used for this study. The shale samples are all illite-rich with up to 60% clay content. Resistivity and porosity measurements were performed under a series of confining pressures (from 500 to 8,500 psi). Nuclear magnetic resonance (NMR) was used to obtain porosity and pore-size distribution and to detect the presence of residual oil. The complex impedance of samples was determined at 1 kHz to verify the change in pore-size distribution using the POLARIS model (Revil and Florsch 2010). The variation of shale resistivity and the Archie exponent m at different pressures is caused by the closure of microfractures at 500 psi, the narrowing of mesopores/macropores between 500 and 3,500 psi, and the pore-throat reduction beyond 3,500 psi. This study indicates that unlike typical reservoirs, the Archie exponent m for shale is sensitive to depth of burial because of the soft nature of the shale pore system. An equation is developed to predict m under different pressures after microfracture closure. Our study provides recommended experimental procedures for the calculation of the Archie exponent m for shales, leading to improved accuracy for well-log interpretation within shale formations when using Archie-based equations.