Fabrication of Be-Ta Ti Alloys without Pre-Alloyed Powders via SLM

In this study, we sucsess the fabrication of dense compornent of Ti-20at.%X (X = Cr and Nb) alloys by Selected laser melting (SLM) pwocess, from a mixture of poweder element powders. The volume rasio of pore and non-molten particles is dependent of the enegy density. The difficulty of fabrication of Ti-X alloy comporment is dependent of melting temperature of X element. Thus, Ti-20at.%Cr alloys, which has the lowest melting temperature of X is easier to monufacture of dense comporment. The Ti-20at.%Cr alloys and Ti-20at.%Nb comprise β-Ti single-phase components without any non-molten particles and macroscopic defects. In addtion, the {001}〈100〉 crystallographic texture of these Ti-Cr and Ti-Nb alloys can be controlled effectively by optimizing the SLM parameters. This means that the SLM is key techmelogy of controlling of Young’s modulus and shape at the same time because Young's modulus of be-ta phase in Ti alloys is strongly related to the crystal orientation.