材料科学
超级电容器
光伏
数码产品
能量转换效率
光电子学
储能
有机太阳能电池
可穿戴技术
碳纳米管
光伏系统
纳米技术
电容器
能量收集
柔性电子器件
电极
可穿戴计算机
电气工程
电压
聚合物
功率(物理)
电化学
计算机科学
复合材料
嵌入式系统
工程类
物理化学
物理
化学
量子力学
作者
Ruiyuan Liu,Masahito Takakuwa,Ailong Li,Daishi Inoue,Daisuke Hashizume,Kilho Yu,Shinjiro Umezu,Kenjiro Fukuda,Takao Someya
标识
DOI:10.1002/aenm.202000523
摘要
Abstract Flexible and biocompatible integrated photo‐charging devices consisting of photovoltaic cells and energy storage units can provide an independent power supply for next‐generation wearable electronics or biomedical devices. However, current flexible integrated devices exhibit low total energy conversion and storage efficiency and large device thickness, hindering their applicability towards efficient and stable self‐powered systems. Here, a highly efficient and ultra‐thin photo‐charging device with a total efficiency approaching 6% and a thickness below 50 µm is reported, prepared by integrating 3‐µm‐thick organic photovoltaics on 40 µm‐thick carbon nanotube/polymer‐based supercapacitors. This flexible photo‐charging capacitor delivers much higher performance compared with previous reports by tuning the electrochemical properties of the composite electrodes, which reduce the device thickness to 1/8 while improving the total efficiency by 15%. The devices also exhibit a superior operational stability (over 96% efficiency retention after 100 charge/discharge cycles for one week) and mechanical robustness (94.66% efficiency retention after 5000 times bending at a radius of around 2 mm), providing a high‐power and long‐term operational energy source for flexible and wearable electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI