Laser direct writing of a multifunctional superhydrophobic composite strain sensor with excellent corrosion resistance and Anti-Icing/Deicing performance

Superhydrophobic composite strain sensors have attracted extensive attention due to their excellent waterproof, anti-icing, flexible and conductive properties, but there are still challenges to prepare it with broad sensing range, superior sensitivity, stable superhydrophobicity, and excellent long-term stability. In this study, we developed a multifunctional superhydrophobic silicone rubber (SR)/multi-walled carbon nanotubes (MWCNTs)/laser-induced graphene (LIG)/SR composite strain sensor using laser direct writing. A highly stable MWCNTs/LIG crosslinked conductive network layer, high-performance superhydrophobic layer, and stretchable SR layer were integrated to fabricate the sensor by tuning the laser parameters. The SR/MWCNTs/LIG/SR composite strain sensor possessed a high gauge factor of 667, large strain detection range of 0–230%, and a stable sensing response over 2500 cycles due to the MWCNTs/LIG crosslinked conductive network. Moreover, the SR/MWCNTs/LIG/SR composite strain sensor could effectively prevent icing owing to its anti-icing (36 [email protected] °C) and photothermal deicing (88 [email protected] W/cm2@NIL) properties and hinder acid and alkaline (pH = 1–14) corrosion attributed to the laser-induced superhydrophobicity, thereby expanding its applications to acid, alkaline, and low-temperature environments. Consequently, the multifunctional superhydrophobic SR/MWCNTs/LIG/SR composite strain sensor is demonstrated to be suitable for human body motion detection in complex and severe environments.