材料科学
钨极气体保护焊
焊接
冶金
奥氏体不锈钢
钨
惰性气体
复合材料
氧化物
气体保护金属极电弧焊
奥氏体
熔池
电弧焊
腐蚀
微观结构
作者
H. S. Patil,Dharmesh C. Patel
标识
DOI:10.3221/igf-esis.61.04
摘要
Gas tungsten arc welding (GTAW) is important in those manufacturing where it is significant to control the mechanical and metallurgical characteristics and its weld bead geometry. This work has been committed to study the influence of oxide fluxes on welding of 4 mm thick 304 austenitic stainless steel plates. The Al2O3 and TiO2 were used as an oxide flux in powder form and are mixed with the acetone. The prepared mixture is applied on bead plate without any joint preparation and without filler wire addition. The Taguchi method with L9 orthogonal array is used to determine the optimal parameters. The current work aims to explore the influence of weld parameters on weld bead geometry (i.e. weld bead width, penetration and angular distortion), and mechanical & metallurgical characteristics for 304 stainless steel welds. The oxide flux seems to narrow the arc and thereby the current density increases at the anode spot, that results in high weld depth.
科研通智能强力驱动
Strongly Powered by AbleSci AI