气溶胶
热泳
纳米颗粒
沉积(地质)
材料科学
化学工程
热解
粒子(生态学)
粒径
热扩散率
纳米技术
燃烧
热喷涂
分析化学(期刊)
化学
色谱法
纳米流体
热力学
物理化学
有机化学
涂层
古生物学
海洋学
物理
沉积物
地质学
工程类
生物
作者
Antonio Tricoli,Tobias Dokkedal Elmøe
出处
期刊:Aiche Journal
[Wiley]
日期:2012-02-17
卷期号:58 (11): 3578-3588
被引量:47
摘要
Abstract The assembly of nanoparticle films by flame spray pyrolysis (FSP) synthesis and deposition on temperature‐controlled substrates (323–723 K) was investigated for several application‐relevant conditions. An exemplary SnO 2 nanoparticle aerosol was generated by FSP and its properties (e.g., particle size distribution), and deposition dynamics were studied in details aiming to a simple correlation between process settings and film growth rate. At high precursor concentrations (0.05–0.5·mol/L), typically used for FSP synthesis, the nanoparticles agglomerated rapidly in the aerosol leading to large (>100 nm) fractal‐like structures with low diffusivity. As a result, thermophoresis was confirmed as the dominant nanoparticle deposition mechanism down to small (≈40 K) temperature differences (ΔT) between the aerosol and the substrate surface. For moderate‐high ΔT (>120 K), thermal equilibrium was rapidly obtained yielding a constant thermophoretic flux and film growth rate. A model was developed to predict the nanoparticle deposition rates by FSP synthesis at moderate‐high ΔT that does not require detailed analysis of the aerosol composition. Comparison with previous studies having similar nozzle geometries showed that the deposition rates of FSP‐made aerosols can be reasonably well predicted for various materials and flame conditions. © 2012 American Institute of Chemical Engineers AIChE J, 2012
科研通智能强力驱动
Strongly Powered by AbleSci AI