A 3D self-floating evaporator loaded with phase change energy storage materials for all-weather desalination

Today, humanity is confronted with two interrelated crises: water and energy scarcity. The utilization of solar energy to evaporate seawater enables the acquisition of freshwater resources while minimizing energy consumption. However, the solar energy hitting the ground is associated with different weather patterns and the alternation of day and night. This work is based on chitosan (CS) aerogel, loaded with phase change material octadecane (ODE) and coated with epoxy resin glue and electrospinning fiber photothermal layer for continuous evaporator operation. Using the characteristics of phase change materials, the ODE undergoes a change from solidification to liquefaction, during which it absorbs and stores energy at elevated temperatures. Conversely, when the temperature decreases, the ODE reverts to solidification and releases stored energy. This enables the evaporator to be utilized in a broader range of scenarios, thereby enhancing the continuity of evaporation. The temperature of the evaporator remained higher than the initial temperature 2 h after the light source was switched off, achieving a light absorption of 94 % and an evaporation rate of 1.74 kg m−2 h−1. Furthermore, it exhibits purification capabilities for different kinds of solutions. The interfacial evaporator is capable of facilitating all-weather evaporation, and it has the potential to become a pivotal instrument in the domain of seawater desalination, with a vast array of applications.