有限元法
材料科学
环氧树脂
极限抗拉强度
复合材料
胶粘剂
结构工程
压力(语言学)
环氧胶粘剂
玻璃纤维
工程类
语言学
哲学
图层(电子)
标识
DOI:10.1016/j.ijmecsci.2012.04.010
摘要
In this study, the effect of scarf angle on tensile strength of an epoxy adhesive was investigated both experimentally and numerically. Tensile tests were carried out using Scarf Lap Joints (SLJs). Commercially available epoxy (Atlac 580) was used as adhesive and fiber reinforced epoxy/glass (Hgw 2372 Grade G10 EP GC 203) was used as adherends. The stress analyses were performed using a three-dimensional Finite Element Method (FEM). The FEM analyses were executed with Ansys (V.14.0.1). Experimental results were compared with the FEM results and found quite reasonable. The results have indicated that when overlap angle increases, the failure load values also decrease in all joints.
科研通智能强力驱动
Strongly Powered by AbleSci AI