Effect of solvent and electrospray mass spectrometer parameters on the charge state distribution of peptides - a case study using liquid chromatography/mass spectrometry method development for beta-endorphin assay

Abstract Beta‐endorphin was used as a model peptide to study the effect of solvent and electrospray mass spectrometer parameters in the optimisation of an assay method for multiply charged compounds using liquid chromatography/mass spectrometry (LC/MS). Unlike with singly charged compounds, the charge state distribution has a significant impact in the method development of multiply charged compounds such as peptides. Using a 50% acetonitrile/water solvent mixture, we found that the ion spray voltage had no influence on the charge state distribution. However, increasing declustering potential led to deprotonation of the higher charge states of the peptide thus causing a shift to lower charge states. The mechanism leading to the deprotonation was examined. It was concluded that the deprotonation is due to endoergic proton transfer from the peptide to solvent molecules clustered to the peptide that occurs in the declustering region. The extent of deprotonation increases with increasing proton affinity of the molecules of the non‐aqueous solvent component used. Thus, if desired, deprotonation can be avoided by selecting a low proton affinity solvent such as methanol. The focusing potential was also found to have a great influence on the charge state distribution observed. The results of this study enabled us to select the optimum ion to be used in single ion/reaction monitoring mode. They also provided the most favourable parameter values to be used in the method to obtain the best sensitivity for the ion of choice. The results demonstrate the importance of considering the charge state distribution in the optimisation of electrospray LC/MS methods for multiply charged compounds. Copyright © 2010 John Wiley & Sons, Ltd.