木棉
生物柴油
材料科学
制浆造纸工业
环境科学
复合材料
有机化学
工程类
化学
生物
生态学
催化作用
作者
B. Saravanan,M.A. Asokan
标识
DOI:10.1016/j.psep.2024.05.051
摘要
Multiple studies have shown that biodiesel blends significantly cut exhaust emissions. However, the most significant challenge was the rising emission of oxides of nitrogen (NOx). The authors' prior research showed that a Ceiba pentandra biodiesel blend (B20) with a higher IP of 260 bar and an advanced IT of 27° BTDC as an optimal Fuel injection parameter (FIP) resulted in superior combustion and reduced emissions except NOx. To further enhance engine performance, fuel reformulation strategies have been implemented together with FIP modification. This research intends to examine the impact of FIP combined with blending of partially hydrogenated biodiesel (HB) on engine characteristics. As a result of partial hydrogenation, the degree of unsaturation decreased by 60%, and the Cetane Number (CN) increased by 22%. Higher BTE (8%), TFC (3.4%), CP (13%), HRR (5%) and lower HC (12%), and CO (5.5%) emissions can be achieved when HB20 was combined with optimal FIP. Superior outcomes were seen with hydrogenated blend (HB20) than with normal B20, with a reduction in NOx emissions by 6.7% without significantly impacting the smoke emission trade-off. Thus, cutting-edge fuel reformulation approaches make way for eco-friendly engineering.
科研通智能强力驱动
Strongly Powered by AbleSci AI