A high-efficiency clay mineral based organic photocatalyst towards photodegradation of butyl xanthate in mineral processing wastewater

The organic solar cell active layer, well known for excellent visible light response capability, is regarded as a potential candidate for photocatalytic degradation of organic wastewater. However, the poor dispersibility in water due to its hydrophobicity property severely limited the degrading efficiency. In this work, a novel composite photocatalyst PM6:IDT8CN-M/CK2 with a broad visible absorption spectrum and non-toxicity was first synthesized through the intercalation compounding method. A good dispersibility of PM6:IDT8CN-M in wastewater was achieved with the help of rich interlamellar porosity and good hydrophilicity of calcined kaolin. This composite photocatalyst was successfully applied to the SBX photocatalytic degradation in mineral processing wastewater, and the SBX pollutants can be completely degraded within 10 min under the condition of visible light irradiation. Compared with other reported photocatalysts, the photocatalytic degradation efficiency of SBX was dramatically improved by at least seven times. Moreover, PM6:IDT8CN-M/CK2 has remarkable stability, sustaining degradation efficiencies of over 90 % in 60 cycles. Notably, the organic solar cell active layer in PM6:IDT8CN-M/CK2 can achieve carrier rapid separation and transport, enhancing the generation of active oxides (∙O2–, and ∙OH, etc.). At the same time, the large surface area of PM6:IDT8CN-M/CK2 provides a suitable environment for the oxidation reaction of active radicals with SBX to achieve this efficient photocatalytic degradation. Overall, this work not only extends the application scope of organic solar cell active layer, but also develops a high-efficiency SBX removal technique for the treatment of mineral processing wastewater.