Computational biomechanics for a standing human body: Modal analysis and simulation

Abstract We develop computational mechanical modeling and methods for the analysis and simulation of the motions of a human body. This type of work is crucial in many aspects of human life, ranging from comfort in riding, the motion of aged persons, sports performance and injuries, and many ergonomic issues. A prevailing approach for human motion studies is through lumped parameter models containing discrete masses for the parts of the human body with empirically determined spring, mass, damping coefficients. Such models have been effective to some extent; however, a much more faithful modeling method is to model the human body as it is, namely, as a continuum. We present this approach, and for comparison, we choose two digital CAD models of mannequins for a standing human body, one from the versatile software package LS‐DYNA and another from open resources with some of our own adaptations. Our basic view in this paper is to regard human motion as a perturbation and vibration from an equilibrium position which is upright standing. A linear elastodynamic model is chosen for modal analysis, but a full nonlinear viscoelastoplastic extension is possible for full‐body simulation. The motion and vibration of these two mannequin models is analyzed by modal analysis, where the normal vibration modes are determined. LS‐DYNA is used as the supercomputing and simulation platform. Four sets of low‐frequency modes are tabulated, discussed, visualized, and compared. Higher frequency modes are also selectively displayed. We have found that these modes of motion and vibration form intrinsic basic modes of biomechanical motion of the human body. This view is supported by our finding of the upright walking motion as a low‐frequency mode in modal analysis. Such a “walking mode” shows the in‐phase and out‐of‐phase movements between the legs and arms on the left and right sides of a human body, implying that this walking motion is spontaneous, likely not requiring any directives from the brain. Dynamic motions of CAD mannequins are also simulated by drop tests for comparisons and the validity of the models is discussed through Fourier frequency analysis. All computed modes of motion are collected in several sets of video animations for ease of visualization. Samples of LS‐DYNA computer codes are also included for possible use by other researchers.