Production of lignin/cellulose acetate fiber-bead structures by electrospinning and exploration of their potential as green structuring agents for vegetable lubricating oils

In this work we developed electrospun lignin/cellulose acetate fiber-bead nanostructures and explored their potential as structuring agents for vegetable oils to be used as eco-friendly lubricating oleogels. A variety of nanostructures were obtained from solutions containing 20 or 30 wt. % eucalyptus Kraft lignin (EKL) and cellulose acetate (CA) in variable weight ratios from 100:0 to 60:40 in an N,N-dimethylformamide/acetone mixture. The EKL/CA solutions were characterized in physicochemical terms from viscosity, surface tension and electrical conductivity measurements. Also, the electrospun nanostructures were characterized morphologically by scanning electron microscopy. Their morphology was found to be strongly dependent on the rheological properties of the biopolymer solution. Electrospun EKL/CA beaded nanofibers and well-developed uniform nanofiber mats allowed oleogels to be easily obtained by simply dispersing them in castor oil whilst nanoparticle clusters gave rise to unstable dispersions. The rheological properties of these gel-like dispersions can be tailored through the membrane concentration and/or EKL/CA ratio and depend to a large extent on the morphology of the electrospun nanostructures. The rheological and tribological properties of the oleogels were comparable to those previously reported for conventional and other bio-based lubricating greases. Overall, electrospun EKL/CA nanofibers allow easy, efficient structuring of vegetable oils to obtain oleogels holding potential for use as lubricants.