A Novel Isolated Intelligent Adjustable Buck-Boost Converter with Hill Climbing MPPT Algorithm for Solar Power Systems

This study proposes a new isolated intelligent adjustable buck-boost (IIABB) converter with an intelligent control strategy that is suitable for regenerative energy systems with unsteady output voltages. It also serves as a reliable voltage source for loads such as battery systems, microgrids, etc. In addition, the hill climbing (HC) maximum power point tracking (MPPT) algorithm can be utilized with this innovative IIABB converter to capture the MPP and then enhance system performance. In this converter, five inductors (LA, LB, LC, LD, and LE) and four power MOSFETs (SA, SB, SC, and SD) are used in the proposed novel isolated intelligent adjustable buck-boost (IIABB) converter to adjust the applied voltage across the load side. It also has a constant, stable output voltage. The new IIABB converter is simulated and verified using MATLAB R2021b, and the performances of the proposed IIABB converter and conventional SEPIC converter are compared. The solar photovoltaic module output voltages of 20 V, 30 V, and 40 V are given as inputs to the proposed IIABB converter, and the total output voltage of the proposed converter is 48 V. In the new IIABB converter, the duty cycle of the power MOSFET has a small variation. The proposed IIABB converter has an efficiency of 92~99%. On the other hand, in the conventional SEPIC converter, the duty cycle of a power MOSFET varies greatly depending on the relationship between the output and input voltage, which deteriorates the efficiency of the converter. As a result, this research contributes to the development of a novel type of IIABB converter that may be employed in renewable energy systems to considerably increase system performance and reduce the cost and size of the system.