Multipurpose ultrasound-based prostate phantom for use in interstitial brachytherapy

While brachytherapy is an effective treatment for localized prostate cancer, there has been a noticeable decline in its use. Training opportunity for prostate brachytherapy has been in steady decline, with some residents receiving little to no hands-on training. This work was developed to design a training environment that uses a phantom-based simulator to teach the process of TRUS-based prostate brachytherapy METHODS AND MATERIALS: A prostate phantom was fabricated from a representative prostate patient TRUS scan. Three materials were used: gelatin powder, graphite powder, and water. The prostate was developed using 9% gelatin and 0.3% graphite per 100 ml water. Five radiation oncologists were asked to qualitatively score the phantom according to image quality, haptic feedback, needle insertion quality, and its compatibility with operative tools. The contrast-to-noise ratio (CNR) was estimated using different concentrations of graphite. The elasticity of the phantom was evaluated based on ultrasound elastography measurements RESULTS: The prostate phantom had an average CNR of 3.94 ± 1.09 compared to real prostate images with a CNR of 2 ± 1.8. The average Young's modulus was computed to be 58.03 ± 6.24 kPa compared to real prostate tissue (58.8 ± 8.2 kPa). Oncologists ranked the phantom as "very good" for overall quality of the phantom. They reported that needle insertion quality was "very good" during a simulated brachytherapy procedure.We have developed a 3D printing prostate phantom to be used for training purposes during prostate brachytherapy. The phantom has been evaluated for image quality and elasticity. The reconstructed phantom could be used as an anthropomorphic surrogate to train residents on prostate brachytherapy procedures.