The orientation of the ALL femoral tunnel to minimize collision with the ACL tunnel depends on the need or not of far-cortex drilling

PurposeTo (1) evaluate the optimal drill orientation of the anterolateral ligament (ALL) femoral tunnel to minimize collision with the anterior cruciate ligament (ACL) femoral tunnel during anatomical ACL reconstruction according to the need for far-cortex drilling and (2) investigate the geometric factors that affect tunnel collision secondary to drill orientation of the ALL femoral tunnel.MethodsA three-dimensional femoral model of patients who underwent anatomical single-bundle ACL reconstruction between 2015 and 2016 was constructed, and the geometric factors were evaluated. Virtual ALL femoral tunnels were created to simulate 45 drilling conditions. For each condition, whether the virtual ALL femoral tunnel and its trajectory violated the femoral cortex and the minimum distance between tunnels was investigated.ResultsThirty-nine subjects were included. Overall violation rates of the femoral cortex by the ALL tunnels and its trajectories were 11.1% (195 of 1755 conditions) and 40.7% (714 of 1755 conditions), respectively. A drilling angle of axial 0° and coronal − 40° showed the longest minimum distance between tunnels without femoral cortex violation by the ALL tunnel (6.3 ± 4.0 mm; collision rate 2.6% [1 of 39 subjects]). With simultaneous consideration of the ALL tunnel’s trajectory representing far-cortex drilling, a drill angle of axial 40° and coronal 10° showed the longest minimum distance between tunnels without femoral cortex violation (0.6 ± 3.9 mm; collision rate 38.5% [15 of 39 subjects]). For surgical techniques requiring far-cortex drilling, regression analyses were performed on geometric factors that could affect tunnel collision, which revealed that the sagittal inclination angle of the ACL and the distance between the ACL femoral tunnel’s outlet and ALL’s femoral attachment were associated with tunnel collision.ConclusionThe optimal drill orientations of the ALL femoral tunnel to minimize collision with the ACL femoral tunnel were axial 0° and coronal − 40° for surgical techniques not requiring far-cortex drilling and axial 40° and coronal 10° for techniques requiring far-cortex drilling. For techniques requiring far-cortex drilling, additional adjustment for orientation of the ACL femoral tunnel is required to reduce the risk of tunnel collision. Therefore, an individualized surgical strategy should be applied according to the graft fixation method of the ALL femoral tunnel.