Low-Frequency Noise Performance of Al-Doped ZnO Nanorod Photosensors by a Low-Temperature Hydrothermal Method

In this paper, we developed a simple hydrothermal method to synthesize vertically aligned ZnO:Al nanorods (NRs) to fabricate a UV photodetector (PD) on a seed layer/glass substrate. The photo-to-dark current ratio of the ZnO:Al NR PD was approximately 1.4×10 ³ under 1-V bias and UV light irradiation (380 nm). The calculated responsivity of the fabricated PD was 181 A · W ^-1 , and the UV-to-visible rejection ratio of the PD at 1-V applied bias was 1.51 × 10 ³ . In addition, flicker noise dominated the noise of the ZnO:Al NR PD. The noise-equivalent power and normalized detectivity of the ZnO:Al NR PD were 1.17 × 10 ^-11 W and 4.03 × 10 ¹² cm · Hz ^0.5 W ^-1 , respectively.