Novel Design and Performance Analysis of 1R1T Remote Center-of-Motion Mechanisms With Partially Decoupled T- and R-Motions

Abstract Remote center-of-motion (RCM) mechanisms provide a way for surgical instruments to pass through a remote center (e.g., skin incision) under geometrical constraints, facilitating safer operations in minimally invasive surgery (MIS). One rotation and one translation (1R1T, pitch and insertion) are the basic requirements for RCM mechanisms. To make the structure simpler and control easier, a novel concept of 1R1T RCM mechanisms with partially decoupled motions, inspired by the double-parallelogram 1R RCM mechanisms, is proposed in this article, by investigating and proving its motion combination principle based on the screw theory. New evolution procedures based on the configuration evolution method have been derived to design 1R1T RCM mechanisms based on two approaches of inserting the T-motion in an original 1R RCM mechanism, resulting in two types of 1R1T RCM mechanisms with partially decoupled motions and base-locating actuators. The kinematic models of one typical proposed mechanism (including the forward and inverse kinematics) and its Jacobian matrix are derived. The performance analysis is presented, including RCM validation, velocity, singularity, and workspace analysis. Then, the dimensional optimization based on the discrete solution method is derived. Finally, a prototype of the proposed mechanism is presented with preliminary experiments performed to verify the feasibility of the synthesized RCM mechanisms. The results show that the RCM mechanism performs the 1R1T partially decoupled motion, and it can be used as the basic element of an active manipulator of an MIS robot.