点火系统
燃烧
激光点火
最小点火能量
材料科学
机械
燃烧室
甲烷
气流
层流火焰速度
扩散火焰
火焰速度
核工程
分析化学(期刊)
化学
物理
热力学
工程类
燃烧室
有机化学
色谱法
作者
Shaohua Zhu,Yuxiang Huang,Lingyu Li,Xianggeng Wei,Bing Liu
标识
DOI:10.1016/j.actaastro.2024.01.015
摘要
Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laser-induced flame nuclei were recorded. The results show that at the airflow velocity of 300–400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 μs, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 μs to 56 μs Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors.
科研通智能强力驱动
Strongly Powered by AbleSci AI