Preparation and Properties of Polyvinyl Alcohol (PVA) Composite Films by Incorporation of Octadecylamine Polyoxyethylene Ether Modified Carbon Black Particles as Filler

In our research described here, a strong acid oxidizing agent was selected to modify the surface of carbon black (CB) to obtain oxidized carbon black (OCB) particles. These OCB particles were then subjected to an ionic bonding reaction with alkaline amine groups present on the surface of octadecylamine polyoxyethylene ether (AC1830) in the form of a paste, resulting in the production of polyether amine-modified oxidized carbon black particles (A-CB). FTIR confirmed the successful production of the A-CB particles. The PVA composite films were prepared using the casting method with varying amounts of A-CB as filler and PVA as the matrix. The films were then analyzed using tensile, scanning electron microscopy, dynamic thermo-mechanical analysis, DSC, and water absorption testing. The results showed that the tensile strength was highest at 3% A-CB, reaching 154.85 MPa. A-CB was well dispersed in PVA at low contents (1% and 3%). The loss modulus, energy storage modulus, crystallinity, and crystallization rate of the A-CB/PVA films improved compared to PVA films. Additionally, the issue of excessive water absorption in A-CB/PVA has been improved.