材料科学
电解质
电化学
氯
电化学窗口
水分
离子电导率
化学工程
电导率
锂(药物)
无机化学
电池(电)
复合材料
电极
冶金
热力学
物理化学
内分泌学
工程类
功率(物理)
物理
化学
医学
作者
Guoyao Li,Shaoping Wu,Hongpeng Zheng,Yu Yang,Jingyu Cai,Hong Zhu,Xiao Huang,Hezhou Liu,Huanan Duan
标识
DOI:10.1002/adfm.202211805
摘要
Abstract Chlorine‐rich argyrodite sulfides are one of the most promising solid electrolytes for all‐solid‐state batteries owing to their remarkable ionic conductivity and decent mechanical properties. However, their application has been limited by imperfections such as moisture instability and poor electrochemical stability. Herein, a Sn and O is proposed dual‐substitution strategy in Li 5.4 PS 4.4 Cl 1.6 (LPSC) to improve the moisture tolerance and boost the electrochemical performance. The optimized composition of Li 5.5 (P 0.9 Sn 0.1 )(S 4.2 O 0.2 )Cl 1.6 (LPSC‐10) sintered at 500 °C exhibits a room‐temperature ionic conductivity of 8.7 mS cm −1 , an electrochemical window up to 5 V, a critical current density of 1.2 mA cm −2 , and stable lithium plating/striping. When exposed to humid air, LPSC‐10 exhibits a small increment in total resistance, generates a mild amount of H 2 S gas, and displays favorable structure stability after heat treatment. The first‐principles calculation confirms that the dual‐substituted composition less tends to be hydrolyzed than the un‐substituted one. The all‐solid‐state battery with LiIn|NMC811 electrodes presents a high initial discharge capacity of 103.6 mAh g −1 at 0.5 C rates and maintains 101.4 mAh g −1 at the 100th cycle, with a 97.9% capacity retention rate. The present study opens a new alternative for simultaneously promoting moisture and electrochemical stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI