Isothermal oxidation behavior of TribaloyTM T400 and T800

Abstract Tribaloy TM alloys are well-known as wear-resistant alloys, however, their oxidation kinetics and mechanisms are not well studied, especially their long-term oxidation behavior. In this work, the long-term isothermal oxidation behavior of Tribaloy TM T400 and T800 in synthetic air at 900 °C for up to 1000 h was investigated. The mass gains of the samples were continuously recorded during the experiments with a thermobalance. Post mortem inspection of the samples was performed and the oxidation mechanism was analyzed. The results show that T800 has a better oxidation resistance than T400. The parabolic rate constant k p of T800 is 4.9·10 −14 g 2 ·cm −4 ·s −1 , which is approximately one order of magnitude lower than 4.8·10 −13 g 2 ·cm −4 ·s −1 for T400. The penetration depth of the oxides in T800 is less than half of that in T400 and steady state oxidation is attained after approximately 200 h, compared to 350 h for T400. The better oxidation resistance of T800 correlates with its higher Cr content whereby protective Cr 2 O 3 scales form more readily.