Model studies of migration from paper and board into fruit and vegetables and into Tenax as a food simulant.

Four samples of paper and board (P/B) of a type used for packaging dry foods were subjected to migration tests using mushrooms, apples, potatoes and bananas, and using the polymeric powder Tenax as a food simulant. The P/B samples contained only low levels of diisopropylnaphthalene (DiPN) and diisobutyl phthalate (DiBP) and so the experiments were conducted after impregnating the P/B with added model substances. These were o-xylene, acetophenone, dodecane, benzophenone, DiPN and DiBP. Migration levels depended strongly on the nature of the substance and on the nature of the food and much less on the characteristics of the P/B, except insofar as they affected the contact area - flexible papers giving more extensive contact with the food than thick rigid board. Migration into Tenax was at least a factor of 10 higher than migration into the fresh fruit and vegetables. The food samples were placed in contact with the P/B and then overwrapped loosely with aluminium foil and so this correction factor will tend to be conservative compared with a more open storage of the packed foods. Washing, peeling or cooking the fruits and vegetables after contact with the P/B had a surprisingly small effect on contaminant levels in general, and no one processing step was effective in giving a significant reduction of all the types of chemicals studied. This was because either they had penetrated into the food (so resisting peeling), or were not freely water-soluble (so resisting washing) or were not particularly volatile (so resisting loss by evaporation during cooking).