Ammonia and toluene oxidation: Mutual activating effect of copper and cerium on catalytic efficiency

Copper and cerium containing hydrotalcite-like precursors Cux-Cey-Mg-Al were synthesized by mutual co-precipitation followed by calcination at 800 °C. The obtained mixed metal oxides were studied as catalysts for selective ammonia oxidation (NH3-SCO) and toluene combustion. Various techniques, such as temperature-programmed reduction with hydrogen, temperature-programmed desorption of toluene, scanning electron microscopy and reactive frontal chromatography were used to characterize the catalysts. Series 800-Cux-Ce2.5 showed the highest catalytic efficiency in both reactions, allowing complete NH3 and C7H8 conversion below 350 °C and 500 °C, respectively. CeO2 crystallites (12–18 nm), as well as dispersed CuO oxide forms were found in the most active samples. Both phases affect pollutants conversion, however, for ammonia oxidation the occurrence of Cu2+ is essential, while for toluene oxidation, the formation of Ce4+ is sufficient. Over the most active sample (800-Cu5-Ce2.5) the complete conversion in mutual oxidation of NH3 and toluene was achieved below 450 °C.