Structure and properties of polylactic acid/butenediol vinyl alcohol copolymer blend fibers

Polylactic acid/butenediol vinyl alcohol copolymer (PLA/BVOH) blends with different weight ratios were prepared by melt mixing. PLA and BVOH in PLA/BVOH blends were immiscible while the weak interaction between PLA and BVOH existed. The introduction of BVOH facilitated the crystallization of PLA. Moreover, the crystallization of PLA hindered the crystallization of BVOH. Due to introduction of BVOH, PLA/BVOH blends exhibited shear thinning characteristic except that PLA/BVOH blends with 5–10 % BVOH showed similar rheological property to neat PLA. With the increase of BVOH content, the contact angle of PLA/BVOH blends decreased from 79.75° to 67.33° at 120 s. The hydrophilicity of PLA/BVOH blends was improved. In addition, PLA/BVOH fibers with 5–40 % BVOH and PLA/BVOH/rutin fibers with 3 % rutin were manufactured by melt spinning. The effect of BVOH on the mechanical property of PLA/BVOH fibers was small. However, BVOH improved significantly the rutin release rate and antioxidant properties of PLA/BVOH/rutin fibers.