One-step fabrication of soot particle-embedded fibrous membranes for solar distillation using candle burning-assisted electrospinning

Solar distillation, a promising technique for water purification and desalination, requires photothermal materials to efficiently convert solar energy into heat. In this study, a novel method is proposed wherein fresh carbonaceous (soot) particles, as a photothermal material, are embedded into electrospun fibrous membranes by burning candles (to produce soot) and electrospinning of polymer material simultaneously. The proposed method can produce several types of membranes with various particle positions (interior or exterior) in the polymer fiber. The particle positions were adjusted by changing the introduction points of particles using a polymer jet. Polymer fibers with diameters of several hundred nanometers were fabricated. Experiments revealed that the soot particle position did not influence the photothermal conversion performance of the membranes. The fabricated membrane could improve the heat localization up to 194.5% and exhibited water distillation and desalination rates as high as 1.60 and 1.55 kg m−2h−1, respectively, under 1-sun solar light irradiation. The proposed method opens a new route for the functionalization of polymer membranes.