Fast, One‐Step In Situ Synthesis of a Hierarchical Sn4+‐Doped TiNb2O7 Nanosphere as a High‐Performance Anode Material

Abstract Titanium niobium oxide (TNO) exhibits great potential as a lithium‐ion battery anode due to its high capacity, minimal volume change during cycling, and safe good operation characteristic enabled from its voltage profile. However, its intrinsically low electronic and ionic conductivity hinders its potential for practical applications. This work proposes a facile coprecipitation method to address these limitations by incorporating a nano‐macro structure and in situ Sn ion doping into bulk TNO. This approach ensures homogeneous integration of TNO precursors and the Sn dopant at a molecular level within the co‐precipitation nanoparticles. Additionally, the use of low toxicity solvents facilitate scalability of the synthesis process. Excellent rate capability, high reversible capacities, and good capacity retention are achieved simultaneously due to synergistic effects of the bulk doping, which expands the crystal volume and enhances Li + diffusion, combined with abundant surface area of the nano‐macro structures. The specific capacity of Sn‐doped TNO nanospheres remains at 180 mAh/g at a high current density of 40 C (1 C=400 mA g −1 ), which is nearly four times higher than that of undoped samples. Furthermore, the cyclic voltammetry analysis at various scanning rates reveals an increased Li + diffusion rate in Sn doped titanium niobium dioxide.