聚丙烯腈
聚吡咯
过硫酸钾
材料科学
复合数
纤维
聚合
扫描电子显微镜
热重分析
复合材料
乳液聚合
傅里叶变换红外光谱
过硫酸铵
高分子化学
化学工程
聚合物
工程类
作者
Handan Acar,Meral Karakışla,Mehmet Saçak
摘要
Abstract Conducting polypyrrole (PPy)/polyacrylonitrile (PAN) composite fibers were prepared by the polymerization of pyrrole in the presence of PAN fibers with potassium persulfate in an acidic aqueous solution. We obtained composite fibers containing concentrations of PPy as high as 1.14% and having surface resistivities as low as 0.6 kΩ/cm 2 by changing the polymerization parameters, including the temperature and concentrations of pyrrole and oxidant. The tensile strength of 10.02 N/m 2 and breaking elongation of 32.68% for the pure PAN fiber increased up to 10.45 N/m 2 and 33.23%, respectively, for the composite fiber containing 0.13% PPy. The change in the resistivity of the PPy/PAN composite fiber during heating–cooling cycles in the temperature range of +5 to 120°C was examined. Scanning electron microscopy and optical microscopy images of the composite fibers showed that the PPy coating was restricted to the surfaces of the PAN fibers. Surface resistivity measurements, Fourier transform infrared spectroscopy, and thermogravimetric analysis techniques were also used to characterize the composite fibers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
科研通智能强力驱动
Strongly Powered by AbleSci AI