Liming Requirements of Greenhouse Peat-based Substrates Amended with Pine Wood Chips as a Perlite Alternative

Processed loblolly pine ( Pinus taeda ) wood has been investigated as a component in greenhouse and nursery substrates for many years. Specifically, pine wood chips (PWCs) have been uniquely engineered/processed into a nonfibrous blockular particle size suitable for use as a substrate aggregate. The objective of this research was to compare the dolomitic limestone requirements of plants grown in peat-based substrates amended with perlite or PWC. In a growth trial with ‘Mildred Yellow’ chrysanthemum ( Chrysanthemum × morifolium ), peat-based substrates were amended to contain 0%, 10%, 20%, 30%, 40%, or 50% (by volume) perlite or PWC for a total of 11 substrates. Substrates were amended with dolomitic limestone at rates of 0, 3, 6, 9, or 12 lb/yard 3 , for a total of 55 substrate treatments. Results indicate that pH of substrates amended with ≥30% perlite or PWC need to be adjusted to similar rates of 9 to 12 lb/yard 3 dolomitic limestone to produce similar-quality chrysanthemum plants. In a repeated study, ‘Moonsong Deep Orange’ african marigold ( Tagetes erecta ) plants were grown in the same substrates previously formulated (with the exclusion of the 50% ratio) and amended with dolomitic limestone at rates of 0, 3, 6, 9, 12, or 15 lb/yard 3 , for a total of 54 substrate treatments. Results indicate a similar dolomitic limestone rate of 15 lb/yard 3 is required to adjust substrate pH of 100% peatmoss and peat-based substrates amended with 10% to 40% perlite or PWC aggregates to the recommended pH range for african marigold and to produce visually similar plants. The specific particle shape and surface characteristics of the engineered PWC may not be similar to other wood products (fiber) currently commercialized in the greenhouse industry, therefore the lime requirements and resulting substrate pH may not be similar for those materials.