Electrochemical adsorption of perfluorooctanoic acid on a novel reduced graphene oxide aerogel loaded with Cu nanoparticles and fluorine

Perfluorooctanoic acid (PFOA) is widely concerned because its serious toxicity to the environment and ecosystems. In order to effectively and conveniently remove PFOA from aqueous solutions, reduced graphene oxide aerogel modified by Cu nanoparticles and fluorine (Cu/F-rGA) was prepared by the microbubble template method as an electrode in electrosorption. The removal capacity of Cu/F-rGA electrode to PFOA was 489% and 45.9% higher at + 0.8 V than that of open circuit and unmodified electrode, respectively. These significant improvements can be attributed to the advantages of Cu/F-rGA in ligand exchange reaction and electrostatic attraction under voltage assistance. The regeneration of Cu/F-rGA electrode maintained 75.51% capacity after 10 times electrosorption-desorption by applying reverse voltage. These properties provided potential for the reuse and application of Cu/F-rGA electrode. The electrosorption isotherm and model results showed that PFOA tended to be parallel to the adsorption site at low temperature and perpendicular at high temperature. The number of PFOA molecules connected to each adsorption site was 0.72–1.76, and the number of adsorption layers of PFOA on the electrode was between 1.46 and 2.87. Findings from this study provide a green and effective strategy to remove PFOA from aqueous solutions with low energy consumption.