材料科学
循环伏安法
线性扫描伏安法
镁
热重分析
电化学
阴极
介电谱
锂离子电池
锂(药物)
电解质
分析化学(期刊)
无机化学
电池(电)
化学工程
电极
冶金
有机化学
化学
物理化学
医学
功率(物理)
物理
量子力学
工程类
内分泌学
作者
R. Rosli,Othman Othman,Nurhidayu Haji Harudin,M.Z. Kufian,Annie Maria Mahat,Faridah Sonsudin,I. Supa’at,Z. Osman
摘要
Abstract Magnesium ion battery is an alternative for secondary battery instead of lithium ion battery due to its advantages of low cost, safety and environment friendly. Magnesium (Mg) is safer compared to lithium (Li) where it has high stability in contact of air and prevent the formation of dendrites during electrochemical cycling. The cathode materials of un‐doped MgMn 2 O 4 and Al‐doped MgMn 2‐x Al x O 4 , x = .01, .02, .03 were prepared using self‐propagating combustion method with triethanolamine fuel as a reducing agent. All samples (powder form) were annealed at 700˚C in 6 h based on the thermogravimetric analysis results. The samples were been characterized using X ray diffraction, field emission electron microscopy, energy‐dispersive X‐ray spectroscopy and high‐resolution transmission electron microscopy to study structural and morphological properties of the samples. Electrochemical properties of linear sweep voltammetry, cyclic voltammetry, and charge‐discharge capacity were performed in 1 M Magnesium Trifluoromethanesulfonate (MgTf 2 ) with ratio 1:1 of ethylene carbonate: dimethyl ether electrolyte. The discharge capacity of magnesium ion cells using Al‐doped cathode material showed the improvement of 68% compared to the un‐doped sample.
科研通智能强力驱动
Strongly Powered by AbleSci AI