Structural energy storage composites based on etching engineering Fe-doped Co MOF electrode toward high energy density supercapacitors

Metal organic frameworks (MOFs) have been used widely as cathode materials for supercapacitors because of their adjustable chemical composition, variable topological structures, and relatively simple synthesis methods. However, most MOFs are insulated and their metal organic ligand coordination bonds are not stable enough in electrolytes, which greatly limits the application of MOFs in supercapacitors. The synergistic effect between transition metal doped and chemical etching is of great significance for the preparation of high-performance MOF electrodes. This study introduces Fe into Co MOF prepared by co precipitation to optimize the electronic structure of Co, and then constructed e-Fe-doped Co MOF hierarchical structure through ammonia etching. The Co MOF achieves rapid electron exchange at the electrode electrolyte interface through this synergistic effect, improving conductivity, and increasing specific surface area, exposing more active sites, effectively enhancing the electrochemical activity of the electrode. Therefore, the e-Fe-doped Co MOF-4 h has a high specific capacity of 700 C g−1 at 1 A g−1 with a 90.08 % high-rate performance. The assembled e-Fe-doped Co MOF-4 h//N-doped WC ASC provides the energy density of 80 Wh kg−1 at a power density of 800 W kg−1 with a ∼88 % capacitance retention after 10000 cycles. These results provide ideas for utilizing synergistic effects to prepare high-energy density supercapacitors using MOF materials.