Fabrication of mullite micro/nano fiber-based porous ceramic with excellent mechanical and thermal insulation properties

Mullite fiber-based porous ceramics is one of the most commonly used high-temperature insulation materials. However, how to further reduce the thermal conductivity and improve the strength of such materials has been a challenge in the field of high-temperature insulation. In this paper, mullite micro/nano fiber-based porous ceramic was prepared by introducing mullite nanofibers into mullite microfiber-based porous ceramics and the effect of microfiber/nanofiber weight ratio on the samples properties were characterized and analyzed. Results showed that the compressive strength and high-temperature thermal insulation properties of the porous ceramics increased significantly with an increase in the nanofiber content. For the porous ceramics with similar density (about 0.50 g/cm3), the compressive strength of the sample with a microfibers/nanofibers weight ratio of 1:2 was 1.43 MPa, which was much higher than that of the porous ceramics prepared with only microfibers (0.26 MPa). Meanwhile, the backside thermal equilibrium temperature of the sample with a microfiber/nanofiber weight ratio of 1:2 at 900 °C environment was 355.8 °C, which was much lower than that of the porous ceramic prepared with only microfibers (476.5 °C). In addition, in order to investigate the temperature resistance of mullite micro/nano fiber-based porous ceramics, the sintering temperatures was increased from 1400 °C to 1500 °C. Results shows that the high-temperature thermal insulation performance of mullite micro/nano fiber-based porous ceramics with high mullite nanofiber content decays more seriously. The back-temperature test showed that the thermal equilibrium temperature of the samples with a mullite micron/nanofiber weight ratio of 1:1 in 900 °C environment increased rapidly from 386.3 °C to 454.2 °C when the sintering temperature was increased from 1400 °C to 1500 °C. The preparation of mullite micro/nanofiber-based porous ceramics provides a new strategy to improve the performance of fiber-based porous ceramics.