Additive manufacturing of Invar 36 alloy

Invar 36 alloy, renowned for its ultra-low coefficient of thermal expansion (CTE), is a functional Fe–Ni alloy that finds wide applications in aerospace and precision instruments. Additive manufacturing (AM), as a rapid digital manufacturing process, can efficiently and flexibly fabricate Invar 36 alloy parts with complex geometric and exceptional properties. Considering the advantages of AM and the increasing interest and demand for Invar 36 alloy parts fabrication by AM in recent years, it is imperative to provide a comprehensive summary of the current research status and technological advancements pertaining to AM Invar 36 alloy. Firstly, an overview of the AM processes currently employed for fabricating Invar 36 alloy is provided, including laser powder bed fusion, selective laser sintering, directed energy deposition, cold spraying additive manufacturing, wire arc additive manufacturing, and binder jetting. Additionally, the microstructure, mechanical properties, and CTE of Invar 36 alloy manufactured by AM are summarized. Even eliminating the post heat treatment, the as-printed Invar 36 alloy can achieve excellent low CTE and mechanical properties, comparable to or exceeding traditional manufacturing processes. Moreover, the advantages and research progress of AM Invar 36 alloy composites are introduced. Enhancing mechanical properties while reducing CTE is a common challenge for both AM Invar 36 alloy and Invar composites. Finally, the technical gaps, research trends, and potential applications of AM Invar 36 alloy are summarized and prospected.